No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x10A0021 Failed To Add The New Disk To The Disk Domain

0x10A0021 Failed To Add The New Disk To The Disk Domain

Description

The encryption type of a new disk is inconsistent with the disk domain.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0x10A0021

Alarm

Major

No

Impact on the System

The type of disk domain is inconsistent with that of the new disk. The new disk is unavailable.

Possible Causes

  • The disk domain is not encrypted, but the encryption function of the new disk is enabled.
  • The disk domain is encrypted, but the new disk does not have the encryption function.
  • The encryption type of the new disk is different from that of disks in the disk domain.

Procedure

  1. Check the encrypt status of the disk domain.

    1. Check the encrypt status of the disk domain.
      • The disk domain is encrypted=> Step2.
      • The disk domain is not encrypted=> 1.2.
    2. Disable the encryption function of the disk manually or insert a disk without the encryption function.
      • If the alarm persists=> Step3.

  2. Check the encrypt status of the disk.

    1. Check the disk encrypt status.
      • The disk is not encrypted=> 2.3.
      • The disk is encrypted=> 2.2.
    2. Check the encrypt type of the new disk and the other disks in the disk domain.
      • The encrypted type of disk is the same=> Step3.
      • If not => 2.3.
    3. Insert another disk with the same encryption type.
      • If the alarm persists=> Step3.

  3. Collect all related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 16267

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next