No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00270137 Remote Replication Is Automatically Split

0xF00270137 Remote Replication Is Automatically Split

Description

The remote replication is automatically split.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0xF00270137

Alarm

Warning

Yes

Impact on the System

The remote replication is not synchronized automatically. It must be manually synchronized following storage pool expansion.

Possible Causes

  • The storage pool where the primary or secondary LUN of the remote replication resides does not have sufficient space.
  • The disk enclosure where the primary or secondary LUN of the remote replication resides is not powered on.
  • The disk where the primary or secondary LUN of the remote replication resides is faulty.

Procedure

  1. Check whether the storage pool, where the primary or secondary LUN of the remote replication resides, has sufficient space.

    1. If no, expand the storage pool and manually start synchronization for the remote replication. If the alarm persists=> Step2.
    2. If yes=> Step2.

  2. Check whether the disk enclosure, where the primary or secondary LUN of the remote replication resides, is powered on.

    1. If no, power on the disk enclosure and manually start synchronization for the remote replication. If the alarm persists=> Step3.
    2. If yes=> Step3.

  3. Check whether the disk where the primary or secondary LUN of the remote replication resides, is faulty.

    1. If yes, replace the faulty disk and manually start synchronization for the remote replication. If the alarm persists=> Step4.
    2. If no=> Step4.

  4. Collect all related information and contact technical support engineers.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 16079

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next