No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x300F001C0001 Failed To Add A Remote Replication To A Consistency Group In Delayed Mode

0x300F001C0001 Failed To Add A Remote Replication To A Consistency Group In Delayed Mode

Description

Adding a remote replication to a consistency group in delayed mode fails.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0x300F001C0001

Run Log

Warning

Yes

Impact on the System

N/A

Possible Causes

  • After you run the command for adding the remote replication to the consistency group in delayed mode, operations are performed on the remote replication and consistency group.
  • The storage pool is faulty.
  • The controller is faulty.

Procedure

  1. Check whether the user operates the remote replication and consistency group in delayed mode after running the command for adding the remote replication to the consistency group.

    1. If yes=>no action is required.
    2. If no=> Step2.

  2. Determine whether you need to add the remote replication to the consistency group in delayed mode again and restart the synchronization based on the status of the consistency group, and whether the remote replication has been added to the consistency group.
Translation
Download
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 17857

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next