No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Event Reference for File

OceanStor Dorado V3 Series V300R002

This document is applicable to OceanStor Dorado5000 V3, Dorado6000 V3 and Dorado18000 V3. This document describes the basic knowledge about the events of storage system in terms of event definition, event level, impact on the system, possible cause, and handling procedure.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00CA0008 The Super Administrator Needs To Review User Account Information

0xF00CA0008 The Super Administrator Needs To Review User Account Information


The super administrator needs to review user account information.

Applicable Model

Applicable to all models.



Event Type

Event Level

Automatically Cleared





Impact on the System


Possible Causes

When the function of auditing user accounts is enabled, the system sends this alarm at the specified time to remind the super administrator to audit user accounts.


  1. 1. Log in to the system as the super administrator and audit the number, level and status of user accounts to ensure user account security. For example, check whether there are user accounts that are not used and need to be deleted, whether the user level is the same as the assigned level, and whether the status of the password is normal. If the user account is detected to be abnormal, handle the user account in time to ensure account security. 2. Manually clear this alarm after auditing the user account. 3. If you do not need the periodic alarm notification function of auditing the account anymore, disable the function in the security policy settings.
Updated: 2019-07-17

Document ID: EDOC1100076630

Views: 20406

Downloads: 5

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next