No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server V100R001 Chassis Intelligent Display Parameter Reference 09(MM910)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the OSCA server chassis intelligent display (short for display), common operations, and parameters.

Intended Audience

This document is intended for:
  • Field maintenance engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

09

2019-09-18

This issue is the ninth official release.

08

2019-04-16

This issue is the eighth official release.

07

2017-07-20

This issue is the seventh official release.

06

2015-02-16

This issue is the sixth official release.

05

2014-09-15

This issue is the fifth official release, and includes the following changes:

  • The description of the indicator on the display is added to 1 Overview.
  • "Tecal" is deleted.

04

2014-02-28

This issue is the fourth official release, and includes the following changes:

The description of the power-on and power-off status of the CH140 is added to 2.6.1 Viewing the Status ofCompute Nodes.

03

2014-01-01

This issue is the third official release, and includes the following changes:

The following topics are added:

02

2013-08-30

This issue is the second official release, and includes the following changes:

2.7.4 Viewing the Status of the Management, Switch, and Pass Through Modules is modified, for the component numbers marked in the Rear page figure is updated.

01

2013-01-04

This issue is the first official release.

Translation
Download
Updated: 2019-09-20

Document ID: EDOC1100078258

Views: 3341

Downloads: 21

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next