No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Atlas 300 User Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation and Deployment Process

Installation and Deployment Process

Before installing and deploying software and hardware, you need to perform the tasks shown in Figure 6-1.

Figure 6-1 Installation and deployment process

Table 6-1describes each task in the process.

Table 6-1 Task description



Installing Hardware

Install the Atlas 300 AI accelerator card on a server.

Installing an OS

Install an OS on the Atlas 300 that has been installed.

Installing the Driver Package

Install the driver package for the Atlas 300 where the OS has been installed.

(Optional) Installing and Deploying the Developer Environment

Install and deploy the DDK in the OS.

(Optional) Creating an Application

  • Download the developer software installation package of the Atlas 300.
  • Create an application to implement AI functions.
Updated: 2019-07-29

Document ID: EDOC1100079295

Views: 3110

Downloads: 79

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next