Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MIPI-CSI Ports
The Atlas 200 DK developer kit (model 3000) has two MIPI-CSI ports, and the definitions of the two ports are the same.
- Table 4-1 defines the pins of a MIPI-CSI port when the PCB is IT21VDMB.
- Table 4-2 defines the pins of a MIPI-CSI port when the PCB is IT21DMDA.
Table 4-1 Pin definition of the camera port (PCB IT21DMDA)
Pin |
Name |
Pin |
Name |
|---|---|---|---|
1 |
GND |
2 |
CAM_DN0 |
3 |
CAM_DP0 |
4 |
GND |
5 |
CAM_DN1 |
6 |
CAM_DP1 |
7 |
GND |
8 |
CAM_CN |
9 |
CAM_CP |
10 |
GND |
11 |
NC |
12 |
NC |
13 |
GND |
14 |
NC |
15 |
NC |
16 |
GND |
17 |
CAM_GPIO0 |
18 |
CAM_GPIO1 |
19 |
GND |
20 |
SCL0 |
21 |
SDA0 |
22 |
VCC3V3 |
Table 4-2 Pin definition of the camera port (PCB IT21VDMB)
Pin |
Name |
Pin |
Name |
|---|---|---|---|
1 |
NC |
2 |
GND |
3 |
NC |
4 |
NC |
5 |
GND |
6 |
NC |
7 |
NC |
8 |
GND |
9 |
NC |
10 |
NC |
11 |
GND |
12 |
NC |
13 |
NC |
14 |
GND |
15 |
NC |
16 |
NC |
17 |
GND |
18 |
NC |
19 |
NC |
20 |
GND |
21 |
NC |
22 |
CAM_DN0 |
23 |
GND |
24 |
CAM_DP0 |
25 |
NC |
26 |
GND |
27 |
NC |
28 |
CAM_DN1 |
29 |
GND |
30 |
CAM_DP1 |
31 |
NC |
32 |
GND |
33 |
NC |
34 |
CAM_CN |
35 |
GND |
36 |
CAM_CP |
37 |
NC |
38 |
GND |
39 |
GND |
40 |
NC |
41 |
GND |
42 |
CAM_GPIO0 |
43 |
NC |
44 |
NC |
45 |
CAM_GPIO1 |
46 |
SCL0 |
47 |
SDA0 |
48 |
NC |
49 |
NC |
50 |
VCC3V3 |
51 |
VCC3V3 |
- |
- |
