Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the Atlas 200 DK Developer Board over the Serial Port
The Atlas 200 DK developer board provides two serial ports for interconnecting with the mini module and 3559 module respectively. Figure 9-2 shows the serial port connection diagram.
Two serial ports are provided: miniD (for Ascend 310) and 3559 (for Hi3559). Connect the serial lanes according to the colors.
For the serial cable, use 1.8 V USB-to-serial cables. The 3.3 V ones are not supported.
