Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Board Precautions
- Before powering the board on, ensure that the Atlas 200 AI accelerator module is properly installed. Otherwise, the board cannot be powered on properly.
- Do not remove the case. If the board has to be exposed in special scenarios, do not touch the AI accelerator module and power module of Atlas 200 without protection.
- When using a non-standard power adapter, ensure that the power supply range and power meet the board requirements.
- The signal level is 3.3 V. When using the interfaces, pay attention to the level matching. Otherwise, the board may be damaged.
- The 40-pin extension header does not have strict ESD protection design. Avoid static electricity and do not insert or remove it without disconnecting the power supply.
