No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Atlas 200 Hardware Development Guide 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the hardware schematic diagram design, printed circuit board (PCB) design, and board thermal design recommendations for the Atlas 200 AI accelerator module (Atlas 200) and provides the hardware design methods.

Intended Audience

This document is intended for:
  • Huawei technical support engineers
  • Technical support engineers from channel partners
  • Hardware development engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Release Date

Description

03

2019-11-15

This issue is the third official release.

Added the SD description in SD/eMMC Port.

Added the description of the hibernation and wakeup flag bit of the pin GPI02 and the description of enabling the hibernation and wakeup of the pin GPIO6 in Other Ports.

02

2019-07-29

Second official release.

01

2019-04-30

First official release.

Translation
Download
Updated: 2019-11-18

Document ID: EDOC1100079542

Views: 4387

Downloads: 54

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next