No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager eBackup Product Description 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deployment Scenarios

Deployment Scenarios

Before installing the eBackup software, plan a deployment solution based on site requirements. This section describes deployment scenarios of the eBackup software in public cloud backup scenarios.

Figure 2-1 and Figure 2-2 show the deployment of the eBackup software in public cloud VBS and CSBS scenarios.

Figure 2-1 eBackup deployment in the VBS scenario

Figure 2-2 eBackup deployment in the CSBS scenario


Deployment modes and locations of different components vary with projects. For details, contact project contact persons.

  • Karbor and eBackup Manager & Workflow are deployed on controller nodes of IaaS OpenStack at the cascading layer.
  • The eBackup Server & Proxy is deployed on VMs of the FusionCompute based on the IaaS OpenStack.
  • eBackup drivers need to be installed on all nodes of the OpenStack with role blockstorage-driver, blockstorage-driver-vrmxxx, or blockstorage-driver-kvmxxx (xxx can be 001, 002, or another value) assigned at the cascaded layer. eBackup drivers communicate with Cinder drivers and eBackup nodes.
  • The eBackup software saves the backup data of EVS disks to the object storage.
  • eBackup nodes can report alarms to a ManageOne OC server.
  • OpsMonitor or CloudMonitorCenter can be used to monitor performance of eBackup nodes.
Updated: 2019-04-26

Document ID: EDOC1100079909

Views: 1308

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next