No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0.1 eBackup Security Hardening (Euler) 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Before You Start

Before You Start

If the eBackup server runs the Euler operating system, perform security hardening by referring to this document.

If the eBackup server uses the SUSE operating system, see the OceanStor BCManager 6.5.0.1 eBackup Security Hardening Guide(SuSE).

  • To query the SUSE operating system, perform the following steps:
    1. Use PuTTY to log in to the eBackup server as user hcp.

      The default password of user hcp is PXU9@ctuNov17!.

    2. Run the following command:

      cat /etc/SuSE-release

      If information similar to the following is displayed, the SUSE operating system is used:

  • To query the Euler operating system, perform the following steps:
    1. Use PuTTY to log in to the eBackup server as user hcp.

      The default password of user hcp is PXU9@ctuNov17!.

    2. Run the following command:

      cat /etc/euleros-release

      If information similar to the following is displayed, the Euler operating system is used:

Download
Updated: 2019-04-26

Document ID: EDOC1100079910

Views: 1028

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next