No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ntp server

change ntp server

Function

Modifies an NTP server that synchronizes the system time.

Format

change ntp server server_ip standby_server_ip=?

Parameters

Parameter

Description

Value

server_ip

IP Address of the NTP server.

If the value indicates a host name, the value contains 1 to 255 characters. If the value indicates an IP address, the value is in dotted decimal notation.

standby_server_ip

(Optional) IP Address of the NTP server.

If the value indicates a host name, the value contains 1 to 255 characters. If the value indicates an IP address, the value is in dotted decimal notation.

Views

setting

Level

Super administrator

Usage Guidelines

None

Example

Modify an NTP server that synchronizes the system time.

setting:/>change ntp server 192.168.1.89 standby_server_ip=192.168.1.88 

WARNING: You are about to modify the NTP service. 
Have you read warning message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2464

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next