No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete storage_pool

delete storage_pool

Function

Deletes a storage pool.

Format

delete storage_pool ID

Parameters

Parameter

Description

Value

ID

ID of the storage pool that you want to delete.

The value is an integer ranging from 1 to 9223372036854775807.

Views

management

Level

Administrator

Usage Guidelines

Run show storage_pool to check the ID of the storage pool that you want to delete, and then delete the storage pool.

Example

Delete the storage pool whose ID is 1.

management:/>delete storage_pool 1 
DANGER: You are about to delete storage pool(ID:1). The storage pool will be deleted from the backup system. 
Suggestion: Before performing this operation, ensure that the selected storage pool is correct. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2640

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next