No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change repository

change repository

Function

Modifies information about a repository.

Format

change repository ID [repository_new_name=?] [full_quota=?] [capacity=?] [alarm_threshold=?] [description=?]

Parameters

Parameter

Description

Value

ID

ID of the repository that you want to modify.

The value is an integer ranging from 1 to 9223372036854775807.

repository_new_name=?

User-defined new name of the repository.

The name contains a string of 1 to 128 characters which can only be letters, digits, Chinese characters, plus signs (+), underscores (_), hyphens (-), periods (.), and at signs (@).

full_quota=?

Set the full quota for the repository.

The value is "on" or "off .

If the value is "on", the repository can use the maximum capacity available in the storage pool.; if the value is "off", user must specify the capacity of the repository.

capacity=?

The capacity for the repository.

Set the capacity for the repository. The repository's capacity range is from 1 to 999999999GB.

alarm_threshold=?

Alarm threshold.

When repository capacity usage exceeds the threshold, an alarm is generated indicating that users need to expand capacity or delete unnecessary backup data to release storage space.

The value is an integer ranging from 1 to 100.

description=?

Description of the repository.

The description contains a maximum of 1024 characters.

Views

management

Level

Administrator

Usage Guidelines

When you need to modify capacity of a repository, the entered capacity value cannot be smaller than the used capacity or greater than capacity of the storage pool where the repository resides.

Example

Change the name of the repository whose ID is 1 to np_new_01.

management:/>change repository 1 repository_new_name=np_new_01 
Command executed successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2587

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next