No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change user

change user


Modifies information about a user.


change user name [action=?] [role=?] [session_mode=?] [session_numbers=?]






Name of the user.

The name contains 3 to 32 characters which can only be letters, digits, and underscores (_), and must start with a letter.


You can reset the user password, lock or unlock the user, and force the user to go offline.

The value can be reset, unlock, lock, or offline, where:

  • reset: resets the user password.
  • unlock: unlocks the user.
  • lock: locks the user.
  • offline: forces the user to go offline.


Role of the user.

The value can be Administrator or RegularUser, where:

  • Administrator: administrator who has all the rights except user management.
  • RegularUser: common user who only has access and recovery operation rights.


The session mode, specify that whether open the function to limit the quantity of sessions.

The value can be open or close. The default value is close.


The upper limit of user's sessions.

The value is a integer.

The value is an integer. The value ranges from 1 to 8.

New password

New login password of the user.

This parameter is valid only when action is reset.

By default, the password must conform to the following rules: (You can modify the password policy.)

  • Contains 8 to 16 characters.
  • Contains one special character. Special characters include `~!@#$%^&*()-_=+\|[{}];:'",<.>/? and spaces.
  • Contains any two types of uppercase letters, lowercase letters, and digits.
  • The number of consecutive occurrences of one character cannot exceed three.
  • The password cannot be the same as the user name or in reverse order of the user name.

Reenter password

Confirms the password. The reentered password must be the same with the value of New password.

This parameter is valid only when action is reset.

The same as the value of New password.




Super administrator

Usage Guidelines



Change the role of user1 to regular.

management:/>change user user1 role=RegularUser 
Command executed successfully.

System Response


Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 3292

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next