No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show HA_parameter

show HA_parameter

Function

The show HA_parameter command is used to query the HA parameters.

Format

show HA_parameter

Parameters

None

Views

management

Level

Super administrator

Usage Guidelines

None

Example

Show HA parameter.

management:/>show HA_parameter 
    Management Floating IP Address : 192.168.32.32   
    Quorum Gateway(s)              : 192.168.0.1 . 

System Response

The following table explains some parameters in the command output:

Parameter

Description

Floating IP Address

Floating ip,which is Used by a maintenance terminal or a third-party system to log in to the eBackup system.

Quorum Gateway(s)

Quorum_gateway, which is used to determine whether to trigger a primary/standby switchover. One to three quorum gateways can be configured. Use commas (,) to separate multiple IP addresses.

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2619

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next