No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete protected_set

delete protected_set

Function

Deletes a protected set.

Format

delete protected_set ID

Parameters

Parameter

Description

Value

ID

ID of the protected set that you want to delete.

The value is an integer ranging from 1 to 9223372036854775807.

Views

management

Level

Administrator

Usage Guidelines

Run show protected_set to check the ID of the protected set that you want to delete, and then delete the protected set.

Example

Delete the protected set whose ID is 1.

management:/>delete protected_set 1 
DANGER: You are about to delete protected set(ID:1). After this operation, the protected objects in the protected set will be unprotected. 
Suggestion: Before performing this operation, ensure that the selected protected set is correct. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2463

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next