No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete faulted_storage_unit

delete faulted_storage_unit


Deletes an invalid storage unit.


delete faulted_storage_unit ID






ID of the storage unit that you want to delete.

The value is an integer ranging from 1 to 9223372036854775807.





Usage Guidelines

  1. Run show storage_unit to check the ID of the storage unit that you want to delete.
  2. After this command is successfully executed, the following operation is needed:

    1. Log in to the operating system of each backup proxy use hcp accout, and switch to user "root" by inputing command su root and its password.
    2. Run the command umount and input the mount point, so that the storage unit is unmounted.
    3. Run the command chattr -i and input the mount point to modify the directory attributes, so that it can be removed later.
    4. Run the command rm -rf and input the mount point to remove it.


Delete the invalid storage unit whose ID is 1.

management:/>delete faulted_storage_unit 1 
DANGER: You are going to delete a faulted storage unit(ID:1), and delete associated storage pool, repository, backup plan and backup image, this command can be executed only when the storage unit is permanently damaged.  
Suggestion: Before you perform this operation, determine whether the storage unit needs to be deleted. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2711

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next