No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change protected_set

change protected_set

Function

Modifies information about a protected set.

Format

change protected_set ID [protected_set_new_name=?] [protected_environment_name=?] [protected_object_definition=?] [description=?]

Parameters

Parameter

Description

Value

ID

ID of the protected set that you want to modify.

The value is an integer ranging from 1 to 9223372036854775807.

protected_set_new_name=?

User-defined new name of the protected set.

The name contains a string of 1 to 128 characters which can only be letters, digits, Chinese characters, plus signs (+), underscores (_), hyphens (-), periods (.), and at signs (@).

protected_environment_name=?

Protected environment name.

The name contains a string of 1 to 128 characters which can only be letters, digits, Chinese characters, plus signs (+), underscores (_), hyphens (-), periods (.), and at signs (@).

protected_object_definition=?

Backup object definition.

The value contains 4 to 65536 characters. A rule is presented as the full path of a backup object. Each level of path is presented as Keyword=Value. Paths are separated by commas (,) and rules are separated by semicolons (;). If you need to exclude one path, add a hyphen (-) before the path. You can input the following keywords: POOL, LUN, ESX, Cluster, CNA, VM, Folder, DataCenter, VirtualApp, ResourcePool, Disk, and Datastore. Disk can only be used in a filter rule and appear after a full path. If the first keyword is Datastore, the supported format is 1.Datastore=datastoreName1 2.Datastore=datastoreName1;-Datastore=datastoreName 3.Datastore=datastoreName1;-Datastore=datastoreName,Disk=X, where X indicates one or multiple disks that can be expressed by bus type, bus number, and slot number. A bus type can be SATA, SCSI, or IDE. A bus number can range from 0 to 9. A slot number can range from 0 to 60. For example, IDE:1:5. In addition, you can use symbol & to filter two or more disks, for example, IDE:0:0&SCSI:1:5, or you can use hyphens (-) to filter two or more disks whose bus numbers or slot numbers are consecutive, for example, IDE:0-3:0-29.

description=?

Description of the protected set.

The description contains a maximum of 1024 characters.

Views

management

Level

Administrator

Usage Guidelines

None

Example

Change the backup object definition of the protected set whose ID is 1 to Cluster=ManagementCluster,CNA=CNA28,VM=test.

management:/>change protected_set 1 protected_object_definition=Cluster=ManagementCluster,CNA=CNA28,VM=test 
Command executed successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 2553

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next