No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor BCManager 6.5.0 eBackup Command Reference 01

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete backup_image

delete backup_image

Function

Deletes a backup image.

Format

delete backup_image ID

Parameters

Parameter

Description

Value

ID

The ID of backup image.

The ID contains 36 characters which can be 0-9, a-f, A-F, and hyphens (-).

Views

management

Level

Administrator

Usage Guidelines

Run show backup_image to check the ID of the backup image that you want to delete, and then delete the backup image.

Example

Delete a backup image.

management:/>delete backup_image 55055157-3093-4ad7-85d5-4072c1059cd9 
DANGER: You are about to delete the backup image(ID:55055157-3093-4ad7-85d5-4072c1059cd9). After this operation, the protected objects in the protected set cannot use the backup image to restore data.  
Suggestion: Before performing this operation, ensure that the selected backup image is correct. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command send successfully.

System Response

None

Download
Updated: 2019-04-26

Document ID: EDOC1100079912

Views: 3274

Downloads: 1

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next