No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing a Server Location

Changing a Server Location

Run the following command to change the server location, which cannot be used to change the servers added to the storage pool:

./dswareTool.sh --op updateServerLocation -manageIp manageIp -rackId rackId -subRackId(optional) subRackId -slotId(optional) slotId

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op updateServerLocation

Changes a server location.

-manageIp manageIp

Specifies the server management IP address.

-rackId rackId

Specifies the cabinet information about the server.

-subRackId(optional) subRackId

Specifies the subrack number about the server.

-slotId(optional) slotId

Specifies the slot information about the server.

An IPv4 example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh dswareTool.sh --op updateServerLocation -manageIp 192.168.245.103 -rackId rack1
[Mon Sep 12 19:52:46 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Mon Sep 12 19:52:48 CST 2016] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh dswareTool.sh --op updateServerLocation -manageIp 2016:8:40:160:c13:0:169:32 -rackId rack1
[Mon Sep 12 19:52:46 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Mon Sep 12 19:52:48 CST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5872

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next