No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Storage Pool Parameters

Querying Storage Pool Parameters

Run the following command to query storage pool parameters:

./dswareTool.sh --op queryPoolParameters -poolId poolId

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op queryPoolParameters

Query storage pool parameters.

-poolId poolId

Specifies the ID of the storage pool. For example:0.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> sh dswareTool.sh --op queryPoolParameters -poolId 0
[Fri Apr 1 06:17:34 UTC 2016] DswareTool operation start.
Operation finish successfully. Result Code:0
parameterName                                       parameterValue                                      type    
----------------------------------------------------------------------------------------------------------------
p_max_osd_num_2copy                                 1024                                                1       
p_brief_cache_size                                  192                                                 1       
p_cache_prefetch_switch                             open                                                1       
p_max_osd_on_nvdimm                                 12                                                  1       
p_meta_backup_flush_switch                          open                                                1       
p_cache_transfer_sleep_time                         1800                                                0       
p_hot_cache_transf_ratio                            10                                                  0       
p_read_hot_cache_switch                             open                                                1       
mdc_security_level                                  1                                                   1      
[Fri Apr 1 06:14:17 UTC 2016] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4636

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next