No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring CPU Binding for a TaiShan Server

Configuring CPU Binding for a TaiShan Server

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to configure CPU binding for a TaiShan server:

./dswareTool.sh --op setArmCoreBindMode -id pool_id --ip(optional) ip1,ip2,ip3 -mode 0/1

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op setArmCoreBindMode

Configures CPU binding for a TaiShan server.

-id pool_id

Specifies the ID of a storage pool.

-ip(optional) ip1,ip2,ip3

Specifies the management IP address of an FSA node.

-mode 0/1

Specifies whether to configure CPU binding. The value can be 0 (does not configure the binding) or 1 (configures the binding).

An IPv4 example is provided as follows:

[dsware@FSM01 bin]$ ./dswareTool.sh --op setArmCoreBindMode -id 0 -ip 172.17.123.247 -mode 1
This operation is high risk,please input y to continue:y
[Tue Sep 26 11:05:25 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Tue Sep 26 11:05:44 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

[dsware@FSM01 bin]$ ./dswareTool.sh --op setArmCoreBindMode -id 0 -ip 2016:8:40:160:c13:0:169:32 -mode 1
This operation is high risk,please input y to continue:y
[Tue Sep 26 11:05:25 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Tue Sep 26 11:05:44 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4800

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next