No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cold Migrating a Volume

Cold Migrating a Volume

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to cold migrate a volume:

sh --op migrateVolume -src volumeName -p poolId



Specifies an executable program for the tool.

--op migrateVolume

Cold migrates a volume.

-src volumeName

Specifies the name of the volume to be migrated.

-p poolId

Specifies the ID of the destination storage pool.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./ --op migrateVolume -src lun2 -p 1
This operation is high risk,please input y to continue:y
[Wed Nov 11 17:19:45 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
[Wed Nov 11 17:19:48 CST 2015] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4734

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next