No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping the Disk Pre-Flush

Stopping the Disk Pre-Flush

Run the following command to stop the disk pre-flush:

sh --op stopPreflush -id(optional) poolId



Specifies an executable program for the tool.

--op stopPreflush

Stops the disk pre-flush.

-id(optional) poolId

Specifies the ID of the resource pool. This parameter is optional.

An example is provided as follows:

dsware@FSM6135:/opt/dsware/client/bin> ./ --op stopPreflush -id 0
[Wed Nov 11 10:05:15 UTC 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
[Wed Nov 11 10:05:17 UTC 2015] DswareTool operation end.
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 6059

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next