No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Converting Metadata

Converting Metadata

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to convert metadata:

sh --op transMetadata -transform upgrade/rollback -force true/false



Specifies an executable program for the tool.

--op transMetadata

Converts metadata.

-transform upgrade/rollback

Specifies the converting mode.

-force true/false

Specifies whether to forcibly convert metadata.

An example is provided as follows:

dsware@FSM6135:/opt/dsware/client/bin> ./ --op transMetadata -transform upgrade -force false  
This operation is high risk,please input y to continue:y  
[Wed Nov 11 10:00:20 UTC 2015] DswareTool operation start.  
Operation finish successfully. Result Code:0  
omMessageVersion : 5
clusterMessageVersion : 6
[Wed Nov 11 10:00:22 UTC 2015] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4751

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next