No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Saving Information About the Specified Heterogeneous Storage Media

Saving Information About the Specified Heterogeneous Storage Media

Run the following command to save information about the specified heterogeneous storage media:

The specified heterogeneous storage media can be obtained from the /opt/dsware/client/conf/IsomerMedia.xml file, which is generated using the scanMediaForIsomer command. In this file, the storage media whose mediaRole is isomer_for_dsware, vendor is 0, and phySlot is greater than or equal to 5000 are the specified heterogeneous storage media. The slot numbers allocated to the heterogeneous media start from 73.

./dswareTool.sh --op saveIsomerMedia

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op saveIsomerMedia

Saves information about the specified heterogeneous storage media.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op saveIsomerMedia

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4717

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next