No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking All Storage Pools in the Cluster for Partitions in the unok State

Checking All Storage Pools in the Cluster for Partitions in the unok State

Run the following command to check all storage pools in the cluster for partitions in the unok State:

./dswareTool.sh --op checkExistUnokPt

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./dswareTool.sh --op checkExistUnokPt
[Tue Jan 26 11:32:11 CST 2016] DswareTool operation start.
Operation finish successfully. Result Code:0
The result is:no
[Tue Jan 26 11:32:12 CST 2016] DswareTool operation end.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4818

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next