No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying System Dynamic Parameters

Querying System Dynamic Parameters

Run the following command to query system dynamic parameters:

NOTE:

System dynamic parameters are the parameters that can be modified after a storage pool is created.

For details, see the /opt/dsware/manager/webapps/dsware/WEB-INF/SystemConfiguration.xml file.

./dswareTool.sh --op querySysDynamicPara -n(optional) paraName

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op querySysDynamicPara

Queries system dynamic parameters.

-n(optional) paraName

Specifies the parameter name. This parameter is optional.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op querySysDynamicPara
[Wed Nov 4 10:25:23 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
parameterName                   parameterValue                  
------------------------------------------------------------------------
p_capacity_thin_rate            0                               
p_write_through_size            262144                          
p_write_through_switch          open                            
p_crb_write_through_switch      close                           
period_time                     300                             
recently_access_time_threshold  120                             
default_recently_access_time_threshold120                             
high_average_same_lba_period    3.0                             
mid_average_same_lba_period     2.0                             
low_average_same_lba_period     1.0                             
low_threshold                   12                              
mid_threshold                   14                              
high_threshold                  16                              
g_iops_limit_per_vbs            0                               
g_iobw_limit_per_vbs            0                               
g_io_limit_alarm_ratio          0                               
g_io_limit_restore_ratio        0                               
g_io_limit_alarm_time_threshold 0                               
g_io_limit_alarm_report_period  0                               
g_osd_smartinfo_monitor_switch  open                            

[Wed Nov 4 10:25:24 CST 2015] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4690

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next