No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Status of the Function for Automatically Adding the Removed OSD Nodes Into the Storage Cluster

Querying the Status of the Function for Automatically Adding the Removed OSD Nodes Into the Storage Cluster

Run the following command to query the status of the function for automatically adding the removed OSD nodes into the storage cluster:

sh dswareTool.sh --op queryFaultyRecoverSwitch

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./dswareTool.sh --op queryFaultyRecoverSwitch
[Wed Nov 11 17:22:27 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
switch: open
[Wed Nov 11 17:22:29 CST 2015] DswareTool operation end.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5914

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next