No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the RoCE Congestion Parameters

Configuring the RoCE Congestion Parameters

Run the following command to configure the RoCE congestion parameters:

./ --op batchSetRoceCongestion -f /opt/dsware/client/conf/roce_congestion_config.xml




Specifies an executable program for the tool.

--op batchSetRoceCongestion

Configures the RoCE congestion parameters for a node.

-f /opt/dsware/client/conf/roce_congestion_config.xml

Specifies the absolute path of the .xml file containing the RoCE congestion control parameters.

An example is provided as follows:

[dsware@FSM01 bin]$ ./ --op batchSetRoceCongestion -f /opt/dsware/client/conf/roce_congestion_config.xml
[Thu Mar 16 04:24:30 UTC 2017] DswareTool operation start. Enter User Name:admin Enter Password : Operation finish successfully. Result Code:0 Successful nodes:1 Failed nodes:0 
[Tue Feb 28 18:49:40 CST 2017] DswareTool operation end.

Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4813

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next