No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying System Parameters

Querying System Parameters

Run the following command to query system parameters.


System parameters are the initialization parameters and cannot be modified after the management cluster and storage pools are created.

./ --op querySysPara -n (optional) paraName




Specifies an executable program for the tool.

--op querySysPara

Queries system parameters.

-n paraName

Specifies the parameter name. This parameter is optional.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./ --op querySysPara -n vbs_start_port
[Wed Nov 4 10:31:03 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
parameterName                 parameterValue               type    
vbs_start_port                10901                        1       
[Wed Nov 4 10:31:06 CST 2015] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4748

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next