No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Migrating an MDC Node

Migrating an MDC Node

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to migrate an MDC node:

./dswareTool.sh --op migrateMDC -sourceIp sourceIp -destIp destIp

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op migrateMDC

Migrates an MDC node.

-sourceIp sourceIp

Specifies the management IP address of the server from which the MDC process is to be deleted.

-destIp destIp

Specifies the IP address of the server to which the MDC process is to be deployed.

An IPv4 example is provided as follows:

sh dswareTool.sh --op migrateMDC -sourceIp 192.168.246.45 -destIp 192.168.246.46
This operation is high risk,please input y to continue:y
[Fri Jul 28 16:40:17 CST 2017] DswareTool operation start.
Enter User Name:gmadmin
Enter Password :
Operation finish successfully. Result Code:0
[Fri Jul 28 16:41:19 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

sh dswareTool.sh --op migrateMDC -sourceIp 2016:8:40:160:c13:0:169:32 -destIp 2016:8:40:160:c13:0:169:34
This operation is high risk,please input y to continue:y
[Fri Jul 28 16:40:17 CST 2017] DswareTool operation start.
Enter User Name:gmadmin
Enter Password :
Operation finish successfully. Result Code:0
[Fri Jul 28 16:41:19 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4832

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next