No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Main Storage and Cache Parameters

Querying Main Storage and Cache Parameters

Run the following command to query main storage and cache parameters:

./ --op querySysMediaPara -m mediaType -n(optional) paraName




Specifies an executable program for the tool.

--op querySysMediaPara

Queries main storage and cache parameters.

-m mediaType

Specifies the main storage type. The value can be hdd, ssd, nvdimm, none, ssd_card, ssd_disk, and men_sim.

-n paraName

Specifies the parameter name.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./ --op querySysMediaPara -m ssd
[Wed Nov 4 10:51:29 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
parameterName                 parameterValue                type                            
p_ssd_split_granularity       600                           1                               
p_osd_io_depth                256                           1                               

[Wed Nov 4 10:51:31 CST 2015] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4859

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next