No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Backing Up Metadata

Backing Up Metadata

Run the following command to back up metadata:

sh --op backupMetadata -label labelName -type(Optional) VBS



Specifies an executable program for the tool.

--op backupMetadata

Backs up the metadata.

-label labelName

Specifies the label name.

-type(Optional) VBS

Specifies the backup object type. This parameter is optional. The current version supports only VBS. MDC and ALL are not supported. By default, this parameter is set to ALL.

An example is provided as follows:

dsware@FSM6135:/opt/dsware/client/bin> ./ --op backupMetadata -label labelName01 -type VBS 
[Thu Mar 31 20:04:34 CST 2016] DswareTool operation start.  
Operation finish successfully. Result Code:0  

backup vbs metadata successfully.  

[Thu Mar 31 20:04:50 CST 2016] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4831

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next