No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logically Powering Off an NVMe SSD

Logically Powering Off an NVMe SSD

Run the following command to logically power off an NVMe SSD:

./dswareTool.sh --op poweroffNvmeDisk -ip nodeIp -slotNo slotNo -esn ESN

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op poweroffNvmeDisk

Logically powers off an NVMe SSD.

-ip nodeIp

Specifies the IP address of the node.

-slotNo slotNo

Specifies the slot of the NVMe SSD.

-esn ESN

Specifies the ESN of the NVMe SSD.

An IPv4 example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> sh dswareTool.sh --op poweroffNvmeDisk -ip 192.168.1.2 -slotNo 76 -esn 969a0b61232342c838a818351d718
This operation is high risk,please input y to continue:y
[Thu Jul 28 10:01:25 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Poweroff NVMe disk takes 30 seconds, please wait 30 seconds before performing other operations.
[Thu Jul 28 10:01:47 CST 2016] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> sh dswareTool.sh --op poweroffNvmeDisk -ip 2016:8:40:160:c13:0:169:32 -slotNo 76 -esn 969a0b61232342c838a818351d718
This operation is high risk,please input y to continue:y
[Thu Jul 28 10:01:25 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Poweroff NVMe disk takes 30 seconds, please wait 30 seconds before performing other operations.
[Thu Jul 28 10:01:47 CST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4719

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next