No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the KMS Information

Modifying the KMS Information

Run the following command to modify the KMS information:

NOTE:

Enter the password of the EVS account if you need to the change the account password. Otherwise, press Enter. Change at least one parameter.

./dswareTool.sh --op modifyKMSInfo -KMSType(optional) HW -KMSAddress(optional) KMSAddress -KMSPort(optional) KMSPort -IAMAddress(optional) IAMAddress -IAMPort(optional) IAMPort -EVSDomain(optional) EVSDomain -EVSxrole(optional) EVSxrole -EVSAccount(optional) EVSAccount

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op modifyKMSInfo

Modifies the KMS information.

-KMSType HW

Specifies the KMS type. Only Huawei KMS is supported currently. This parameter is optional.

-KMSAddress KMSAddress

Specifies the address of the KMS. This parameter is optional.

-KMSPort KMSPort

Specifies the port number of the KMS. This parameter is optional.

-IAMAddress IAMAddress

Specifies the address of the IAM server. This parameter is optional.

-IAMPort IAMPort

Specifies the port number of the IAM server. This parameter is optional.

-EVSAccount EVSAccount

Specifies the EVS account. This parameter is optional.

-EVSPassword EVSPassword

Specifies the password of the EVS account. This parameter is optional.

An example is provided as follows:

[dsware@FSM01 bin]$ sh dswareTool.sh  --op modifyKMSInfo -KMSPort 1234
This operation is high risk,please input y to continue:y
[Tue Dec 20 02:45:10 ACWST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Enter EVSPassword :
Operation finish successfully. Result Code:0
task id: 5
[Tue Dec 20 02:45:16 ACWST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4659

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next