No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking FSA Process Consistency Information

Checking FSA Process Consistency Information

Run the following command to check the FSA process consistency information:

sh /opt/dsware/client/bin/dswareTool.sh --op Service nameCmd -subOp CheckProcessConsistent -clusterId clusterId -type type

Parameter

Description

/opt/dsware/client/bin/dswareTool.sh

Specifies an executable program for the tool.

--op Service nameCmd

Self-defined based on the service.

For the replication service, the value is drCmd.

For the dgw service, the value is dgwCmd.

-subOp CheckProcessConsistent

Checks whether the FSA consistency information.

-clusterId clusterId

Specifies the control cluster ID.

-type type

Specifies the inconsistency type. The value can be 0, 1, or 2. When 0 is specified, FSA nodes which are recorded in the FSM database but actually do not exist are displayed.

When 1 is specified, FSA nodes that are not recorded in the FSM database but actually exist are displayed.

When 2 is specified, FSA nodes which are recorded in the FSM database and actually exist but with other information inconsistent are displayed.

An example is provided as follows:

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp CheckProcessConsistent -clusterId 0 -type 0
[Sat Sep 16 18:27:22 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
manageIp       processType    processId    serverId
-------------------------------------------------------
192.168.35.13    dms            125          3
-------------------------------------------------------
Total records : 1.
[Sat Sep 16 18:27:41 CST 2017] DswareTool operation end.

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp CheckProcessConsistent -clusterId 0 -type 0
[Sat Sep 16 18:19:53 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Sat Sep 16 18:20:12 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4870

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next