No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Global Parameters

Modifying Global Parameters

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to modify global parameters:

./dswareTool.sh --op globalParametersOperation -opType modify -parameter paraName1:value1,paraName2:value2 -ip(optional) ip1,ip2,ip3...

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op globalParametersOperation

Modifies global parameters.

-opType modify

Specifies the operation type.

-parameter paraName1:value1,paraName2:value2

Specifies the parameter name and the new value for the parameter.

-ip(optional) ip1,ip2,ip3...

Specifies the IP addresses of the node for which global parameters are to be modified, for example, 192.168.60.51,192.168.60.52,192.168.60.53.

An IPv4 example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh dswareTool.sh --op globalParametersOperation -opType modify -parameter g_iops_limit_per_vbs:0 -ip
192.168.60.51
This operation is high risk,please input y to continue:y
[Mon Mar 21 14:49:22 CST 2016] DswareTool operation start.
Operation finish successfully. Result Code:0
The count of successful nodes is 1.

The count of failed nodes is 0.

[Mon Mar 21 14:49:29 CST 2016] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh dswareTool.sh --op globalParametersOperation -opType modify -parameter g_iops_limit_per_vbs:0 -ip
2016:8:40:160:c13:0:169:34
This operation is high risk,please input y to continue:y
[Mon Mar 21 14:49:22 CST 2016] DswareTool operation start.
Operation finish successfully. Result Code:0
The count of successful nodes is 1.

The count of failed nodes is 0.

[Mon Mar 21 14:49:29 CST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5904

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next