No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unlocking the Active MDC Node

Unlocking the Active MDC Node

Run the following command to unlock the active MDC node:

sh --op releaseClusterLock -clusterType mdc



Specifies an executable program for the tool.

--op releaseClusterLock

Unlocks the active MDC node.

-clusterType mdc

Specifies the type of the cluster where the MDC node to be unlocked resides.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./ --op releaseClusterLock -clusterType mdc
[Wed Nov 11 17:44:21 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
[Wed Nov 11 17:44:23 CST 2015] DswareTool operation end.

Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4891

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next