No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Manually Backing Up Management Data

Manually Backing Up Management Data

Run the following command to manually back up management data:

./dswareTool.sh --op executeBackupCmd

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op executeBackupCmd
[Tue Nov 3 20:25:53 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
taskId: 25
Run the queryTaskInfo command to query the task execution result.
[Tue Nov 3 20:25:54 CST 2015] DswareTool operation end.

Switch to user root and run the cat /opt/dsware/manager/webapps/dsware/WEB-INF/BackupConf.properties command to obtain the backup directory.

The command output is as follows, and information to the right of backupFileDir is the backup directory:

...
backupFileDir=/opt/dsware/manager/backup
...

The backup directory displayed in the command output is the automatic backup directory. The manual backup directory is in the manual directory of the automatic backup directory.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4881

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next