No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Activating the Synchronized Master Key

Activating the Synchronized Master Key

Run the following command to active the synchronized master key:





Specifies an executable program for the tool.

--op activeKmcMK

Specifies the command used to activate the master key.


Specifies the domain where the master key belongs. The value can be FSM_ENCRYPT, FSA_ENCRYPT, OMA_ENCRYPT, OMA_TRANSFER, EVS_ENCRYPT, VBS_TRANSFER, or VBS_ENCRYPT.

-keyId keyId

Specifies the master key ID.


The values of parameters domainName and keyId specify the domain name and master key ID returned after the master key is successfully generated.

An example is provided as follows:

dsware@SZX1000099371:/opt/dsware/client/bin> sh --op activeKmcMK -domainName FSM_ENCRYPT -keyId 3
[Wed Nov 2 15:13:51 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Wed Nov 2 15:14:08 CST 2016] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4725

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next