No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Domain Name

Setting a Domain Name

Run the following command to set a domain name:

./ --op setDSwareDomainName -name name




Specifies an executable program for the tool.

--op setDSwareDomainName

Sets a domain name.

-name name

Specifies the domain name of the FusionStorage Block web client to be set.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./ --op setDSwareDomainName -name 
[Sat Sep 29 16:17:28 CST 2018] DswareTool operation start.  
Enter User Name:admin  
Enter Password :  
Operation finish successfully. Result Code:0  
[Sat Sep 29 16:17:44 CST 2018] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4750

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next