No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Global Parameters

Querying Global Parameters

Run the following command to query global parameters:

./ --op queryGlobalParameters -paraName(optional) paraName




Specifies an executable program for the tool.

--op queryGlobalParameters

Query global parameters.

-paraName(optional) paraName

Specifies the parameter name. This parameter is optional.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh --op queryGlobalParameters -paraName g_iops_limit_per_vbs
[Fri Apr 1 06:14:11 UTC 2016] DswareTool operation start.
Operation finish successfully. Result Code:0
parameterName                                       parameterValue                                      type    
g_iops_limit_per_vbs                                16                                                  0       

[Fri Apr 1 06:14:17 UTC 2016] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4779

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next