No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the LUN Masking or LUN Mapping Function

Setting the LUN Masking or LUN Mapping Function

Run the following command to set the LUN masking or LUN mapping function:

sh dswareTool.sh --op setLunMaskingSwitch -switch enable/disable -vbsIp(optional) ip1,ip2,ip3...

Parameter

Description

dswareTool.sh

Specifies an executable program for the tool.

--op setLunMaskingSwitch

Sets the LUN masking or LUN mapping function.

-switch enable/disable

Specifies to enable or disable the specified function.

-vbsIp(optional) ip1,ip2,ip3...

Specifies the IP addresses of VBS nodes on which the specified function is to be enabled or disabled. This parameter is optional. If it is left blank, the specified function on all VBS nodes is enabled or disabled.

An IPv4 example is provided as follows:

dsware@KD182249181115:/opt/dsware/client/bin> ./dswareTool.sh --op setLunMaskingSwitch -switch enable -vbsIp 192.168.81.21
[Fri Mar 31 17:07:35 CST 2017] DswareTool operation start.
Operation finish successfully. Result Code:0
Successful nodes: 1
Failed nodes: 0

[Fri Mar 31 17:07:37 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@KD182249181115:/opt/dsware/client/bin> ./dswareTool.sh --op setLunMaskingSwitch -switch enable -vbsIp 2016:8:40:160:c13:0:169:32
[Fri Mar 31 17:07:35 CST 2017] DswareTool operation start.
Operation finish successfully. Result Code:0
Successful nodes: 1
Failed nodes: 0

[Fri Mar 31 17:07:37 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4739

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next