No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Command Set Help

Command Set Help

Run the following command to obtain help information about the command set:

./dswareTool.sh --help

The obtained help information contains all commands.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --help
Usage:  dswareTool.sh
    --op addChapUserToPort -chapName chapName -portName portName
    --op addClusterLock -clusterType mdc/vbs
    --op addDisk -poolId poolId -mediaType sas_disk/sata_disk/ssd_card/ssd_disk -cacheType nvdimm/ssd_card/ssd_disk/none/men_sim -f pathname
    --op addDSwareLock -ip ip
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4884

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next