No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Service Process Information

Clearing Service Process Information

Run the following command to clear service process information:

sh /opt/dsware/client/bin/dswareTool.sh --op Service nameCmd -subOp ClearServiceNode -clusterId clusterId -processType processType -nodeIps ip1,ip2,ip3

Parameter

Description

/opt/dsware/client/bin/dswareTool.sh

Specifies an executable program for the tool.

--op Service nameCmd

Self-defined based on the service. For example:

DR service: drCmd

-subOp ClearServiceNode

Clears service process information.

-clusterId clusterId

Specifies the control cluster ID.

-processType processType

Specifies the service process type. The possible values are cm, zk, dms, ccdb_server, ccdb_monitor, dlm_mm, dlm_vm, and ALL_PROCESS, where ALL_PROCESS indicates all service processes.

-nodeIps ip1,ip2,ip3

Specifies the IP addresses of the nodes where service process information is to be cleared.

An example is provided as follows:

dsware@s_root:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp ClearServiceNode -clusterId 0 -processType zk -nodeIps 192.168.43.11,192.168.43.12,192.168.43.13
[Mon Sep 11 22:08:22 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
result    
----------
0         
----------
Total records : 1.
[Mon Sep 11 22:08:32 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 5793

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next