No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Backup Server Information

Querying Backup Server Information

Run the following command to query backup server information:

./dswareTool.sh --op queryBackupServer

The example command output of an unconfigured backup server is as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op queryBackupServer
[Wed Nov 4 12:09:48 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
Backup server is not configured
[Wed Nov 4 12:09:50 CST 2015] DswareTool operation end.

The IPv4 example command output of a configured backup server is as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op queryBackupServer
[Wed Nov 4 12:09:48 CST 2015] DswareTool operation start.
Enter User Name:admin
Enter Password:
Operation finish successfully. Result Code:0
Backup server ip:192.168.213.100
Backup server port      : 21
Backup server type      : ftps
Backup server username  : ftp
Backup path on ftp      : /CloudComputing/DswareMgr_192.168.213.11/
Upload to ftp flag      : true
[Wed Nov 4 12:09:50 CST 2015] DswareTool operation end.
dsware@FSM:/opt/dsware/client/bin>

The IPv6 example command output of a configured backup server is as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op queryBackupServer
[Wed Nov 4 12:09:48 CST 2015] DswareTool operation start.
Enter User Name:admin
Enter Password:
Operation finish successfully. Result Code:0
Backup server ip:2016:8:40:160:c13:0:169:36
Backup server port      : 21
Backup server type      : ftps
Backup server username  : ftp
Backup path on ftp      : /CloudComputing/DswareMgr_2016:8:40:160:c13:0:169:36/
Upload to ftp flag      : true
[Wed Nov 4 12:09:50 CST 2015] DswareTool operation end.
dsware@FSM:/opt/dsware/client/bin>
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5930

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next