No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring a Service Cluster in an Emergency Scenario

Restoring a Service Cluster in an Emergency Scenario

Run the following command to restore a service cluster in an emergency scenario:

sh /opt/dsware/client/bin/dswareTool.sh --op Service name Cmd -subOp resumeReplicateCluster -controlClusterId controlClusterId -nodeIps ip1,ip2,ip3

Parameter

Description

/opt/dsware/client/bin/dswareTool.sh

Specifies an executable program for the tool.

--op Service name Cmd

Self-defined based on the service.

For the replication service, the value is drCmd.

For the dgw service, the value is dgwCmd.

-subOp resumeReplicateCluster

Restores a service cluster in an emergency scenario.

-controlClusterId controlClusterId

Specifies the control cluster ID.

-nodeIps ip1,ip2,ip3

Specifies the IP address of the node to be restored.

An IPv4 example is provided as follows:

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp resumeReplicateCluster -controlClusterId 0 -nodeIps 192.168.35.12
This operation is high risk,please input y to continue:y
[Mon Sep 18 19:19:54 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
result    detail
--------------------
0         --
--------------------
Total records : 1.
[Mon Sep 18 19:20:34 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp resumeReplicateCluster -controlClusterId 0 -nodeIps 2016:8:40:160:c13:0:169:32
This operation is high risk,please input y to continue:y
[Mon Sep 18 19:19:54 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
result    detail
--------------------
0         --
--------------------
Total records : 1.
[Mon Sep 18 19:20:34 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4712

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next